Blog

Cross Border Xpress: a footbridge to Tijuana's airport

How the Cross Border Xpress terminal in Otay Mesa lets travelers walk across a 390-foot bridge to Tijuana's airport, and how the idea took 25 years to build.

Past the warehouses and truck lots on the southern edge of Otay Mesa stands an airline terminal with no runway. Passengers check in at a counter, clear security on the American side, walk up a ramp and cross a covered pedestrian bridge about 390 feet long. When they come down the other side they are in Mexico, a short walk from the gates of Tijuana International Airport. The building is called Cross Border Xpress, or CBX, and it is the only facility of its kind in the United States: a terminal on one side of an international border that serves an airport on the other.

It is easy to explain and strangely hard to picture until you have done it. A traveler leaves a San Diego driveway, parks at the terminal, checks in for a flight to somewhere in Mexico and boards without ever sitting in a border queue. The same trip in reverse drops an arriving passenger on the American side after clearing U.S. customs inside the terminal. This is how it works, why it exists and what it has changed for people on both sides of the line.

The problem it solves

San Diego and Tijuana are one metropolitan area split by a border. The San Ysidro Port of Entry, one of the busiest land crossings in the world, and the Otay Mesa Port of Entry, the region's main commercial truck crossing, handle the crossings of people and goods. For most of the last several decades, anyone in San Diego County who wanted to fly out of Tijuana had to drive or take a shuttle to the border, wait through the vehicle or pedestrian line in the same lanes as everyone else, then find transportation to the airport on the Mexican side. A traveler who just wanted a flight to another Mexican city, or one of the destinations the airport serves, faced an hours-long process before the airline's own check-in began.

Tijuana's airport sits right on the border, on the Mexican side of Otay Mesa, with the airfield running along the boundary line. That geography is the whole reason CBX works: the airport sits next to American soil, and the border fence is about all that stands between it and a parking lot in San Diego.

A 25-year idea

The idea is older than most of the people who use CBX. A bi-national terminal for Otay Mesa was proposed as early as 1965, when a Mexican official suggested a joint Tijuana-San Diego airport on the mesa. The more specific concept that became CBX was drawn up in 1989. A letter of intent in 1990 identified a possible U.S. site, but the plan stalled when land values collapsed in 1993 and the site was lost to foreclosure.

Mexico's privatization of its airports in 1994 revived the possibility, and a Spanish consortium received a concession in 1999 that was canceled in 2001 to cut costs. After that, the project waited years for a developer with the patience for it. Construction on the Mexican side began in October 2013, and U.S. construction followed in June 2014. The first passengers used the terminal on December 9, 2015, and the official opening ceremony was held on April 7, 2016.

What was built

CBX cost about $120 million by the time it was finished, up from an earlier estimate of $78 million. The terminal on the American side is a large building of about 65,000 square feet, with an architectural design that blends the work of an international firm and a leading Mexican architecture studio. It has about 900 paid parking spaces, rental car counters, taxi stands and shuttle service, and it houses a U.S. Customs and Border Protection facility. The bridge itself is 120 meters, or about 390 feet, long, and it crosses the international boundary.

Passengers meet the pieces in this order:

  1. The parking lot and terminal. Travelers drive in from the State Route 905 corridor, the main highway link from the border area, or arrive by taxi or shuttle.
  2. The ticket window. To use the bridge, you need a boarding pass for a flight to or from Tijuana. Departing passengers buy a ticket to cross, and the bridge is open to them up to 24 hours before their flight. Arriving passengers have two hours after landing to use it.
  3. Security and U.S. exit. Departing travelers leave the United States and cross the span in an enclosed walkway.
  4. Mexican immigration and customs. The walkway ends inside the airport's Mexican side, where travelers go through Mexican immigration and then airport security.
  5. The gate. The first boarding area is a short walk from the bridge.

For an arriving passenger, the order reverses. Passengers walk over the bridge, clear U.S. immigration and customs inside the CBX building and then exit onto the American side. That arrangement is the second reason the facility matters: the inspection happens in a terminal, not in the congested lanes of San Ysidro.

Who rides

CBX is built for people who live on the American side but fly out of Tijuana. That includes San Diego residents visiting family in other parts of Mexico, travelers headed to leisure destinations, business travelers, and people from elsewhere in Southern California who find the airport convenient. People from the Mexican side traveling to the United States use it too, though they must follow the regular entry requirements, which means having the passport or visa that U.S. law requires. Anyone planning a trip should check the current rules for crossing at the official Customs and Border Protection site, because federal law sets the entry requirements and they change.

Not everyone can use it. The bridge is not a border crossing for the general public, and a traveler without a boarding pass for a flight to or from Tijuana cannot use it as a shortcut into Mexico. It is a facility for passengers, not pedestrians.

Within seven months of the opening, about 600,000 passengers had used the bridge, and the busiest single day recorded in its first years was 5,800 passengers. Those figures proved the idea had demand. Fares for a crossing have varied by season and by the kind of ticket, with discounts for families, military personnel, commuters and round-trip purchases. A traveler should consult the facility's current price list and not rely on an older figure.

The neighborhood around it

CBX sits in Otay Mesa, an industrial and logistics district of the city in the far southeast corner. See Otay Mesa. The Otay Mesa Port of Entry, the main commercial truck crossing between California and Mexico, dominates the area, along with warehouses, cross-docking operations and distribution facilities that serve the trade flowing through the border. The Cross Border Xpress terminal is a small but visible part of that economy. Otay Mesa: trucks, a footbridge and a detention center describes the area, and cross-border workers and trade looks at the commuters and trade flows that define it.

The better-known San Ysidro crossing is at the end of the Blue Line trolley. The Blue Line to the border: a day trip tells the story of that corridor, and San Ysidro is the neighborhood on the American side. The trolley does not serve CBX. You get there by car, taxi, shuttle or rideshare, and a visitor who wants to use it should plan on one of those.

San Diego's own airport, by comparison

For a San Diego traveler, CBX is not a replacement for San Diego International Airport, which the County Regional Airport Authority runs and which sits close to downtown. See San Diego International Airport and the Airport Authority and the busiest single-runway airport in the country. The two airports complement each other: San Diego International handles flights to U.S. and international destinations from a single-runway field, and Tijuana's airport adds a second regional airport that many residents use for flights within Mexico. The city's own guide to getting home from its airport, from the airport to your neighborhood, shows by comparison how much more complex a cross-border air trip can be.

A trip, start to finish

Picture a San Diego family flying to another city in Mexico on a morning flight. Say the flight boards early. They drive south on I-805 and then east along State Route 905 to Otay Mesa, park in the terminal lot the evening before or the same morning, buy their crossing tickets and walk up to the bridge with boarding passes in hand. Inside the walkway there is no traffic, no weather and no lane to choose. On the other side they clear Mexican immigration, go through airport security and are at their gate. The border, which in a car can take a morning to cross at peak times, shrinks to a walk of a few minutes.

On the return trip they land, walk to the bridge within the two-hour window, clear U.S. customs and immigration inside the terminal and collect their car. The same hypothetical family would need only the vehicle they already own and the documents they would carry for any international flight.

What to know before you go

A few practical points apply to a first trip:

  • Buy the ticket ahead of time when possible, and keep the boarding pass handy.
  • Bring the right documents. A valid passport is the standard requirement for international travel, and the Mexican and American inspection stations will check it.
  • Leave time. Even with no border queue, inspection takes time on both sides, so plan to arrive with ample margin before a flight.
  • Know where you are parking. The terminal's lots are paid, and the lot is on the American side.
  • Check the current rules. Customs and immigration rules, ticket prices and operating hours are set by the operator and by the governments involved, and they change.

The bridge is a small piece of infrastructure, 390 feet of walkway, but it removed one of the oldest frictions of the border region: that the nearest airport on one side was, for practical purposes, unreachable from the other.

Related city government

Related guides

Related neighborhoods

Latest on this topic