Blog
Your water bill, your meter and your leak adjustment
How to read a San Diego water meter, check for a leak, and ask the city's Public Utilities Department for a leak adjustment within 120 days of a high bill.
The water bill shows up in the mailbox, much bigger than last month, and wants an explanation. It nearly always comes down to one of three things: the household used more water, the meter was read wrong or something on the property is leaking. The city's Public Utilities Department has a process for each, and the first step is the same every time: understand the meter. Below is where it is, how to read it, how to test for a leak with it and what happens once a leak turns up, including the 120-day clock on an adjustment request.
Phone numbers first, since the rest depends on them. Account questions go to Public Utilities customer care at 619-515-3500, Monday through Friday, 7:30 a.m. to 5 p.m., closed on city holidays. Water leaks in the street, sewer spills and pressure problems go to 619-515-3525. The online customer portal is MyWaterSD, and the department's customer support page links to bill payment, service start and stop, payment plans, water surveys and leak adjustments. See San Diego Public Utilities Department for the department as a whole.
Who owns which pipe
Learn where the city's responsibility stops. The city maintains the water system up to the meter. The property owner maintains everything from the meter onward: the line running to the house, the plumbing inside and the fixtures. On the sewer side, the owner maintains the sewer lateral, the pipe from the property to the city's sewer main, including a break beyond the property line that a licensed plumber finds.
The split matters for leaks. A leak between the street main and the meter belongs to the city; a leak after the meter belongs to the owner. It also matters for what the leak adjustment covers, as a later section explains.
Finding and reading the meter
The water meter is usually near the curb in front of the home or business, in line with the main outside faucet. It sits in a concrete box, often marked "water." The department's advice is to lift the lid with a tool such as a large screwdriver, not with your fingers.
To read it:
- Look at the figures under the label "CUBIC FEET."
- Ignore the last two digits, which sit on a black background. A reading of 81,710 is read as 817.
- Keep the units straight. One cubic foot is about 7.5 gallons. The bill uses HCF, a hundred cubic feet, which is 748.5 gallons.
Different meter models look different. The city's Water Meter Visual Glossary shows specific brands.
A worked example
Say a household reads its meter on June 1 and it shows 817. On July 1 it shows 829. The household used 12 HCF in the month. At 748.5 gallons per HCF that is 8,982 gallons, about 299 gallons a day over 30 days. Compare that with your normal use. If your usual month is 7 or 8 HCF, then 12 is a signal worth chasing. The example is hypothetical, and the arithmetic is the point: 12 times 748.5 equals 8,982.
Testing for a leak with the meter
The department's test is simple and free. Turn off every faucet and every water-using appliance in the house, including the ice maker and the irrigation system. Then look at the meter. If it is still turning, water is moving through the system, and you likely have a leak.
Common sources after the meter include:
- A running toilet, the most common household leak, which can waste a large amount over a month.
- A dripping faucet or showerhead.
- A broken irrigation line or sprinkler head.
- A concealed pipe leak under a slab or in a wall or yard, which is the hardest kind to find.
The concealed leak is also the kind that most clearly qualifies for an adjustment.
When the bill comes in high
Public Utilities' billing system holds some bills for review before sending them. Bills reflecting unusual usage or an exceptionally high balance may be held so staff can check whether a meter read is far outside the household's normal range. If you believe a meter read is wrong, you have three options: submit a photo of the meter, request a technician read or call customer care. The city updates the read if it finds an error.
A held bill that is later released can look alarming, but the hold itself is a protective step. If you find a leak during the period a bill was held, you can still request an adjustment.
The leak adjustment
A leak adjustment is a reduction in the bill when a qualifying leak raised the water charges. The department's published rules work like this.
What qualifies. Adjustments cover concealed pipe leaks on the customer's side of the meter that are not related to irrigation. Leaks from swimming pools and from plumbing fixtures such as toilets do not qualify for bills that were sent on time. The city requires proof of repair, with supporting documentation, and a return to normal usage.
The deadline. The request must arrive within 120 days of the customer receiving the first high bill tied to the leak. A request received after that is not considered.
How to ask. Use the online leak adjustment form or call 619-515-3500. The form asks for the name, service address and contact information, the date the leak was found and the date it was repaired.
How long it takes. Requests are generally reviewed and processed in six to eight weeks, and the customer is notified by letter. Phone lines can have long holds at busy times, so the online form is often the quicker route.
The 120-day clock, with dates
Say the first bill showing the leak's effect is received on September 1, 2026. The 120 days run through December 30, 2026: 29 more days take the count to September 30, then 31 days in October, 30 in November and 30 in December make up the rest, for 120. A household that repairs the leak on October 10 and gathers the plumber's invoice, but waits until January to apply, has missed the window. The lesson is to start the request the day the repair is finished and to keep the invoice and the before-and-after meter readings.
What goes on a water and sewer bill
The bill combines water and sewer charges, and the department explains where the money goes. A large share pays for the water itself: the city buys imported water for 85 to 90 percent of what customers use. The rest covers maintenance of pipelines and infrastructure, water testing, treatment and customer services. The city serves about 1.4 million water customers and more than 2.3 million wastewater customers through 9 reservoirs, 3 water treatment plants, 3 wastewater treatment plants, 131 pump stations and more than 6,300 miles of pipeline. For the sources of the supply, see Where San Diego gets its water and the nine reservoirs and three treatment plants. For the city's plan to produce a large share locally, see Pure Water San Diego and the 2035 goal.
The sewer charge for a single-family home works differently from the water charge. It is a flat rate set from the household's winter water use, using the billing cycle with the least usage, with monitoring running mostly from November through April. The new rate takes effect with the bill that includes July 1 and is updated every July 1. A new resident pays the citywide average sewer rate until a winter reading has been taken. In practice a household that waters its lawn all summer is not charged more for sewer service as a result, because sewer is set by winter indoor use.
Pressure and plumbing
If water pressure in the house runs high, there is a rule: California's Plumbing Code requires a pressure regulator on the property when pressure in the area exceeds 80 psi, and the owner maintains it. Normal pressure fluctuates by about 10 psi either way. To check the neighborhood, call 619-515-3525; the city tests pressure at the nearest fire hydrant. If neighborhood pressure is normal, the cause is probably in the home's plumbing. A faulty regulator is the most common reason for sudden high pressure, and low pressure can come from a regulator stuck closed, a shared meter, main replacement work nearby or a leak.
If you cannot pay
The department's customer support page includes a form to request a payment plan. A household facing a large bill, including one caused by a leak, can ask for a plan before the due date; the terms are on the department's page. The bill, the account and the plan all go through the same customer care line, 619-515-3500.
A short checklist
- Locate the meter and read it. Write down the number and the date.
- Turn everything off and check whether the meter is still moving.
- If it is, find and fix the leak, and keep the plumber's invoice.
- Request a leak adjustment within 120 days of receiving the first high bill.
- If you disagree with a meter read, send a photo or ask for a technician read.
- If the bill is too large to pay at once, ask for a payment plan.
- For a new service, or a move, the guide Starting water and power service in San Diego covers starting and stopping water online. For the power bill, see Reading an SDG&E bill.