Blog
Nine council districts, two terms and a staggered calendar
How San Diego's council grew from seven to nine seats, why Districts 2, 4, 6 and 8 voted in 2026 and 1, 3, 5, 7 and 9 in 2024, and how term limits work.
Why nine council members? Why were only some seats on the ballot on November 3, 2026? Why can no one serve more than two terms? Three questions, one source: the city charter and a series of ballot measures that rebuilt the council over eighty years. The nine-member, district-based, term-limited council San Diego has today is the product of five separate changes, each made for a reason that was clear at the time.
This explainer takes them in order, shows how the staggered election calendar works with a worked example, and describes what the council does with its nine votes. It describes how the system works, not who holds any seat; the council's membership changes in December 2026, when the members elected in 2026 take office.
The starting point: seven members in 1931
San Diego's current city charter was adopted in 1931. It created a council-manager government with seven council members. The model suited the city of that day, big enough to need a professional administrator and still compact enough to be governed by a small council.
1963: eight districts
The first big change came in 1963, when the council grew to eight districts. The city had grown a great deal since 1931, through the wartime boom described in San Diego at war, 1941 to 1945 and through annexations such as those of 1957 and 1962 (see the annexations of 1957 and 1962). More territory and more people called for more members.
1974: a full-time council
In 1974 the council became a full-time body. Until then, council service was often a part-time role alongside another job. Going full-time let members devote themselves to the work, and it made the council a different kind of job.
1988: district elections
The change with the longest reach into neighborhoods came in 1988, when council members began to be elected by district and not citywide. Under district elections, each member answers first to the residents of one part of the city. Supporters argue that it favors candidates with roots in a particular neighborhood and gives communities that are a minority citywide a better chance of electing someone who speaks for them. After 1988 a council member is, in the first instance, the representative of a place.
1992: term limits
In 1992 the city adopted term limits. The current rule is that council members serve four-year terms and may serve no more than two. The seats are nonpartisan, which means the ballot does not show a party label. Term limits were a national trend in the early 1990s, driven by the argument that long incumbency produced distance between officials and voters. Opponents argued that they strip experience out of government. Term limits in San Diego: 1992 to now covers the history in detail.
The mayor is also limited to two successive terms. A discussion of the mayor's powers is in How San Diego got its strong mayor, twice.
2012: nine seats
In 2012 the council grew to nine members, completing the structure in use today. Nine has a practical advantage over eight: no tie votes. Under the rules, most council actions need five votes, a majority of nine, and the council can override a mayor's veto with six.
The nine districts and the areas they are associated with, in the general terms used on the city's maps, are:
| District | General area (as labeled on the city's maps) |
|---|---|
| 1 | Northwestern part of the city |
| 2 | Western part |
| 3 | Central part |
| 4 | Southeastern part |
| 5 | Northeastern part |
| 6 | Northern part |
| 7 | Eastern part |
| 8 | Southern part |
| 9 | Mid-City, including areas such as Kensington |
The boundaries are redrawn after each census so each district has roughly the same number of residents. To find out which district an address is in, use the city's council page. The area names are descriptive, not official, and the maps decide.
Why only some seats vote at a time
The council's seats are staggered. Not all nine are on the ballot in the same year. Districts 2, 4, 6 and 8 were on the ballot in 2026, and districts 1, 3, 5, 7 and 9 were on the ballot in 2024. Terms run four years, so the pattern repeats: the odd-numbered districts vote again in 2028, and the even-numbered ones in 2030.
The effect is that the council is never replaced all at once. At any moment about half its members have been through a recent election, and the other half have a different mandate. Continuity of that kind is the main argument for staggered terms.
A table makes the pattern plain:
| Year | Districts on the ballot |
|---|---|
| 2024 | 1, 3, 5, 7, 9 |
| 2026 | 2, 4, 6, 8 |
| 2028 | 1, 3, 5, 7, 9 |
| 2030 | 2, 4, 6, 8 |
A worked example
Say a hypothetical resident lives in District 5 and votes in every election. She voted for her council seat in 2024. She does not vote for that seat in 2026, even though other districts do, and her next chance is 2028. If she moves in 2027 to an address in District 2, she will vote in the District 2 race in 2030, because that district's seat is next on the ballot in that year. That is why the calendar matters when you move: the district you live in decides which election you take part in.
The same logic governs term limits. Say a council member is first elected in 2024 to the District 1 seat. Her first term runs four years, until December 2028. If she wins a second term in 2028, she serves until December 2032, and she cannot run for that seat again. That is the maximum under a two-term limit: eight years. A hypothetical member elected in 2026 in District 4, similarly, could serve until December 2034.
What the nine do
The council is the city's legislature. It passes ordinances, adopts the budget, approves contracts and sets land-use and housing policy. Its members also sit on regional bodies such as the regional planning agency SANDAG and the transit system's board. See SANDAG and San Diego Metropolitan Transit System.
How it works in practice:
- Meetings. The full council meets regularly, with agendas, dockets and minutes posted by the City Clerk, and live video is available online. See Office of the San Diego City Clerk and Attending or commenting at a San Diego City Council meeting.
- Committees. The council has about ten committees, including Budget and Government Efficiency, Public Safety, and Land Use and Housing. A measure usually goes through committee before it reaches the full council. Council committees: where San Diego laws are really argued explains the process.
- Leadership. The council elects a president and a president pro tem each year.
- Votes. Most actions need five votes. An override of a mayoral veto needs six.
- Analysis. The Independent Budget Analyst works for the council and reports on the budget and on ballot measures. See San Diego Independent Budget Analyst.
For a closer look at how the council and the mayor interact, see the mayor's veto and the six votes that override it and a council meeting from docket to vote.
Three common mix-ups
Council district, county supervisorial district and school board area are different maps. The county's Board of Supervisors has five districts of its own, and the school district has its own boundaries. An address can be in District 3 for the city council and in a different supervisorial district for the county. A different body draws each map for a different purpose.
The mayor is not a district's member. The mayor is elected citywide and does not sit on the council or vote on its measures, though the mayor can sign or veto what it passes. Residents therefore have one mayor and one council member, and the two offices answer different kinds of questions.
A vacancy is not a regular election. The staggered calendar describes regular elections. If a seat becomes vacant between elections, the charter has its own procedure for filling it, which the City Clerk can explain.
Putting your district to work
The council member for a district is the first call for a neighborhood concern that needs a policy answer: a proposed development, a traffic safety request, a park project or a local budget priority. For routine problems such as a pothole or a streetlight, the Get It Done system is faster; see Reporting a problem with Get It Done. For a hearing on a measure that affects your block, the way to be heard is to speak or submit a comment at a committee or council meeting. The City Clerk's page lists agendas and how to participate, and Attending or commenting at a San Diego City Council meeting walks through it step by step.
Who runs the elections
The City Clerk runs the city's own elections and handles petitions, campaign filings and financial disclosures, while the County Registrar of Voters runs the actual voting. The 2026 election was the Gubernatorial General Election, and council seats in Districts 2, 4, 6 and 8 were on the same ballot. See Elections and Voting in San Diego and the 2026 council races: four seats and what a district means. To register to vote or check your registration, see Registering to vote and voting in San Diego County.
Why the structure matters
The council's history is a history of tension between representing the whole city and representing parts of it. The 1931 council was a small body meant to think citywide. The 1988 change to districts made the council more responsive to neighborhoods and also more likely to argue over the claims of different neighborhoods. Term limits made the council turn over faster. The move to nine seats added a tiebreaker. Each is a trade, and none is final: the voters can amend the charter again.
For a resident, the practical lesson is to know your district. That is the member whose office handles your neighborhood's concerns, and the district number tells you which years you vote for the seat.